This happened on two separate units that I purchased. Only Windows supports USB. Also, we suggest you download the Microsoft power management tool to help you handle the problem. Check whether he has the latest v1. Nothing from updock was installed. Disable the bi-directional feature for the printer. Asked whether he can use Laplink with it.
|Date Added:||6 March 2004|
|File Size:||67.2 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Nothing from updock was installed.
Tried to specify the path for the driver, but windows could not find a driver. Need to order replacement CD from GW. Could not see each other, but they can all see themselves in network neighborhood. Check your printer settings and try to uninstall everything.
USB to Serial Cable Adapter
Try taking off the devices connected to sdrial hub and see if the problem persists. I can’t find a Win 98 folder to define the system. You might have to contact your hardware supplier for an installation of USB support on your laptop. SYS and could not find the driver in the specified location.
Currently, there are problems with the USB specs and we are still checking the new software. I got the USC adapter for my parallel device because the user guide said it is for both serial and parallel — can I really use it with both?
That sounds like USB to serial adapter, on the adapter it says PC-link, suggested him to get replacement. Then just indicate the directory path when you load it up. Displaying 1 to 10 of 14 reviews.
USB to Serial Adapter – Professional
I cannot install the hub properly and no driver came with the unit. The instruction manual section on usc usb serial converter uc installation clearly states that a component should have been installed esrial the USB Controller heading at the device manager.
My laptop won’t detect the USB bridge cable. DB9 — RJ45 adapter.
My Epson won’t print. I am wunning Windows You may need to uninstall UC and the printer, then reinstall the UC first before the printer. The latest drivers are available on this site.
I purchased several converters from you guys, this one works well too. Yes, but for full USB support, it is recommended to upgrade to Win Or, set it up to PCL mode.
USB Serial Adapter – Windows 10 Compatible High-Speed RS adapter
I can’t find the driver for the UC Or, set it up to PCL mode. Tried on Win system too, same result. What driver do I need to resolve this problem? Make sure the USB is seroal.
Sabrent USB to Serial Cable Adapter | SBT-USC1M
It is only actually for serial, it is a misprint on the user guide. Convwrter, each converter has it own unique ID number which can be accessed by the user with the D2XX driver programmers guide. Try to run the setup, put the driver file on the hard drive, then load the driver from the hard drive. The driver should be in Win 98 under: Check whether both LEDs light up, and when you coonverter the modem in, check to see if the system can detect the device.
Yes, also told him about USB-Qnet if he also needs internet connections sharing and device sharing. I cannot install the hub properly and no driver came with the unit.